15000BPH Automatic Bottle Ginger Ale Carbonated Drink Filling
Machine Stainless Steel 304 316
Ginger ale approach:
1. Boil the ginger syrup first
2. Peel and slice the ginger, and boil it with the same volume of
water
3. Boil on low heat for five minutes, then turn off the heat and
let it stand for one hour
4. Filter out the ginger water with filter, add the same volume of
sugar (1cup) as the original water, and boil until the sugar
dissolves
5. Put it into a small pot and take it as you like
6. Add ginger syrup, crushed mint leaves, lime juice (or lemon
juice), bubble water and ice to drink
It mainly used for producing Carbonated beverage; since carbon
dioxide gases(CO2) are pressurized to mix with liquids , the
pressure throughout the filling system is typically 0.3 Mpa-0.6Mpa.
and because CO2 is more stable at low temperatures, low
temperatures increase the solubility of CO2 in water. To increase
the amount of carbon dioxide dissolved in water, the beverage is
usually mixed and filled at 0-5℃;and there are many other factors
affecting CO2 content in carbonated beverages.
Main Parameters:
| Model | DCGF32/32/10 |
| Production capacity | 15000 bottles/hour 500ml |
| Bottle | Round PET bottle |
| Bottle diameter | 30-90mm |
| Bottle height | 150-320mm |
| Compressed air | 0.3-0.7Mpa |
| Rinsing pressure | 0.25Mpa |
| Total power | 6.2KW |
(1).To use the clamp to hang the bottle neck; to maintain the bottle
shape and speed.
(2) .The parts in contact with the material are made of high quality
stainless steel, no dead angles, easy to clean;
(3) .Using high-speed filling valve, the liquid level is accurating and
there is no liquid leaking, to ensure correct filling;
(4) .The capping adopts advanced technology, the capping and sorting
machine is installed at a lower position, and the cap is in a
horizontal position to ensure the quality of the cap without
damaging the caps;
(5 ).Equipped with a complete protection device to effectively protect
the safety of equipment and operators;
(6) .The control system has the functions of production speed control,
insufficient cover detection, self-stop of card bottle and
production count;
The bottle rinsing is an alternative to the traditional cast iron
material sprocket washer. It not only has a long flushing time,
but also greatly increases the production capacity.
The filling part adopts advanced micro-negative pressure gravity
filling principle, which is fast, stable and accurate. Make sure
the liquid level is accurate and free of liquid damage.
The capping part adopts the magnetic torque type capping head, and
the capping head made of copper material can realize the function
of grasping and screwing the cap quickly and accurately.
The host adopts advanced PLC automatic control technology, and the
main electrical components and pneumatic components are world
famous brand products.
